Aperture 100*100mm Panel Size 2*3m Construction Mesh Welding Machine
Introduction of Construction Mesh Welding Machine:
The construction mesh welding machine is composed of pay-off frame, welding machine, cutting machine and electric control cabinet. The line wire is fed by 24 pay-off stands, and the cross wire is pre-straightened by wire straightening and cutting machine. The iron wire is welded into a mesh by the construction mesh welding machine and then enters the mesh cutting machine and automatically cuts into the mesh. The construction mesh welding machine is mainly used for the resistance point (pressure) welding function of the line wire and the cross wire and the continuous mesh discharge. This construction mesh welding machine is mainly used to make wire diameter 3-6 low-carbon steel wire or galvanized wire.
This construction mesh welding machine requires 2-3 staffs: 1-2 staffs are arranged at the pay-off device to check the consumption of raw materials and complete the loading work, and 1 staff is arranged at the unloading place to place the cut mesh into the finished product area.
Features of Construction Mesh Welding Machine:
1.The mesh size is directly set on the touch screen, which is convenient and simple.
2. Vibration device is added to the cross wire feeding system to prevent wire winding.
3. The line wire automatic wire feeding and the cross wire are pre-straightening and cutting.
4. Cross wire adjustment on the touch screen, line wire adjustment need move the welding electrode.
5. The length of panel mesh can be set by the control panel.
6. We can easily adjust the welding current when we need to weld different wire diameters.
7. The finished product panel mesh is smooth and the error of opposite angle line is small.
8. We can set the output and stop the machine automatically after the mesh production finished.
Advantages of Construction Mesh Welding Machine:
1. Cross wire dithering device.
Pneumatic shaking device is added to the cross wire feeding system to prevent cross wire winding. Reduce mechanical operation
failures.
2. Cross wire feeding system moving device.
The engineer specially added a mobile device to the cross wire feeding system, which can facilitate the customer to adjust the mesh size and move the welding electrode.
3. Cross wire positioning device.
The cross wire positioning device adopts the cylinder type, which can more sensitively adjust the cross wire position and increase the welding speed.
4. Line wire straightening wheel.
Each line wire will pass through the straightening wheel, which can make the mesh more flat and beautiful.
5. Connecting copper block.
The connection between transformer and electrode uses copper block instead of soft copper leaf, which has better quality and conductive effect.
6. Electrode and copper base.
The electrode and copper base are all made of high chromium copper, which is a special alloy material with wear resistance and high temperature resistance. Increase the service life of the electrode.
7. Pull mesh system.
The mesh pulling system adopts servo motor, which can improve the accuracy of mesh size and make the mechanical operation more
smooth.
Technical Parameters of Construction Mesh Welding Machine:
| Item | DX-1200A | DX-1600A | DX-2000B | DX-2500A |
| Number of Electrodes | 24 | 32 | 20 | 48 |
| Max.Mesh Width | 1200mm | 1600mm | 2000mm | 2500mm |
| Wire Diameter | 2.5-6.0mm | 2.5-6.0mm | 3.0-6.0mm | 3.0-6.0mm |
| Cross Wire Space | 50-250mm | 50-250mm | 100-250mm | 50-250mm |
| Line Wire Space | 50-250mm | 50-250mm | 50-250mm | 50-250mm |
| Finished Products Way | Panel Mesh |
| Pulling Mesh Way | Servo Motor |
| Electric Capacity | 125KVA*3 | 125KVA*4 | 125KVA*5 | 125KVA*6 |
| Welding Speed | 50-80t/min | 50-80t/min | 50-80t/min | 50-80t/min |
| Control System | PLC & Touch Screen |
Applications of Construction Mesh Welding Machine:
The Panel Mesh is used in coal mine roof protection, tunnel, bridge construction, roadbed mesh, construction site construction materials.
Photos of Construction Mesh Welding Machine:
Product Tags:
|
|
Construction Mesh Welding Machine Aperture 100x100mm Panel Size 2x3m Images
|
